⚡ Most of the time the programming clamps will not communicate perfectly with the BIOS chip while it is on board due to circuitry interference, we need to extract the chip from the PCB in order to establish a good connection to be able to reach the data correctly.🛠It is always advised to test the clamp connection before taking the risk to heat the board in order to extract the chip, in this video you will clearly see the board warping while the heat is applied to it, exposing the PCB to high temperature is a task that must be dealt with quickly, 1 extra second can push the board to warp or bubble in such a way that the damage will be irreversible.
⚠ **Bro Tip:** Always backup original firmware before any modifications. In some cases If you lose the original firmware, you may end up losing a some friends.
⚠ Safety First: Advanced repair work with high temperatures and chemicals requires proper ventilation and protective gear. Always use a respirator. Attempting this without adequate training and tools can cause serious damage or injury.
Don't forget to Like, Share, and Subscribe for more content!
Audio: Ambisonic Spacial audio 317Kbps, 48.000 KHz, recorder in 4 channels mode with zoom microphone for the best ASMR experience to pleasure your ear drums.
Video: 4K / 60Fps with basic quality enhancements and color grading.
SFX: free to use background sounds from
#blackscreen #Tech #NoPower #F1LAB #GRTLAB #righttorepair #electronics #art #asmr #technology
🔧
• 0:02 - SPI chip specifications and identification
• 0:15 - extraction setup
• 0:30 - Data backup is the most important part
• 0:40 - pad cleaning an
• 1:32 - reinstallation process
• 2:01 - Alignment verification and quality check
Музыка
Фильмы
ТВ Шоу
Категории видео
