Скачайте изображение (превью) выбрав качество

320x180 480x360 640x480 1280x720

Klein Voltage Tester:
This video demonstrates Installing a new ceiling light in a bedroom where there was no junction box or wiring installed. I used the switch on the wall and rewired the outlets which originally were switched (top outlet controlled by a wall switch) to always powered outlets and the wall switch then controlling the ceiling light. Sections or "chapters" of this video are listed below with the corresponding time stamp so you can jump around to fit your project needs.

Note: This is just for entertainment purposes only and you will need to check the electrical code in your area and also ensure all circuits are off during any of the work. Your safety is in your own hands.

Recommended Old Work Box (Different than used in the video):

Chapters
0:00 Introduction
1:12 Planning Out How To Route New Wires
4:11 Cutting Access Holes in Drywall
5:23 Fishing the New Wires Through Ceiling and Walls
8:05 Junction Box and Light Install
9:05 Rewiring Switched Outlets to New Ceiling Light
14:20 Testing New Light and Outlet Wiring

Tools Used
Fish Tape (50 foot):
Klein Voltage Tester:
Klein Outlet Tester:
Klein Tools Multimeter:
Studbuddy Stud Finder:
Wire Strippers:
Makita Corless Drill Combo Kit:

Tools Every Weekend Warrior Needs
Dewalt Drill Bit Set:  
Dewalt Screwdriver Bit Set:  
Craftsman Screwdriver Set: 
Eklind Allen Wrench Set:  
Pliers (4-Piece Set):  
Stanley Utility Knife:  
Stanley Tape Measure:  
Johnson Torpedo Level:  
Stanley Hammer:  
Buck Bros Wood Chisel Set:  
Wire Strippers:  
Little Giant Ladder: 

DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission.

Чтобы скачать видео "How To Install Ceiling Light Without Existing Wiring" передвинте ползунок вправо