Скачайте изображение (превью) выбрав качество

320x180 480x360 640x480 1280x720

Here's how to install an HID kit in any vehicle.

Steps were made to reduce glare output of the HID headlights in the reflector housings. Aluminum tape was used around the Casper shield to reduce the beam width and the amount of light coming out from the high beam hole. Vinyl was used to block portions of the reflector internally, reducing glare significantly.

Overall the headlights are brighter than stock with reduced glare, but obviously not as good as a quality HID retrofit. Good upgrade for those on a budget.

A LUMENS 6000K H4 Bi-Xenon kit with relay harness was used.

The daytime running lights (DRL) were disabled to allow the HID lights to be off during the daytime.

This installation was demonstrated on a Toyota Solara, but the procedure is the same as any vehicle with an H4 low / high beam bulb, such as the Toyota Echo, Sienna, Camry, Corolla and Avalon.

Link to Etsy shop where you can purchase speedkar99's brother's socks, t-shirts or hoodies:


Check out the speedkar99 Facebook page:


Check out the speedkar99 Linkedin page:


Follow speedkar9 on Instagram for behind the scenes coverage:


Subscribe for more videos just like this:

Чтобы скачать видео "How to Install an HID Headlight Kit" передвинте ползунок вправо