Скачайте изображение (превью) выбрав качество

320x180 480x360 640x480 1280x720

DIY Time-lapse video of wrapping fog lights in yellow vinyl.

Vinyl was purchased from ?
A 1 square foot piece of yellow transparent vinyl was used for both fog lights on a Toyota Solara.

Procedure will be similar for many vehicles, however the thick material is difficult to bend around very curvy lights. A heat-gun was used to stretch the vinyl. PlastiX plastic cleaner and rubbing alcohol was used to buff the lights in preparation for the vinyl wrap.

Vinyl is peel and stick, with a protective front layer. Soapy water was used to initially lay the vinyl down on the light and position it, while a squeeze was used to push the water out of the edges. With time, the soap water will dry and bubbles will disappear. The vinyl was trimmed right to the edges.

It took roughly 1 hour to wrap one fog light.

Yellow fogs improve the look and drive-ability of your vehicle enhancing visibility through fog. Vinyl will also protect lights from hazing over time.

Чтобы скачать видео "Yellow Fog Light Vinyl Wrap" передвинте ползунок вправо