Putting the Creality Sermoon D1 to the test

Подробнее о видео

Welcome to ZDNet’s DIY-IT project lab, where I’m testing 3D printers for your entertainment and edification. Today, we’ll be looking at the Creality Sermoon D1, an enclosed, direct drive FDM printer from the makers of the super-popular CR-10 and Ender 3.

Today, we're  assembling and testing the Creality Sermoon D1. This is a very nice printer, but there are a few issues in setup and design you should be aware of before you scoop one of these up.

READ THE FULL ARTICLE ON ZDNET:
Coming soon

RESOURCES:

Creality Sermoon D1:

Statue of Liberty model:

Yoda head:

Aria dragon:

GCODE:

Start G-Code:

M201 X500.00 Y500.00 Z100.00 E5000.00 ;Setup machine max acceleration
M203 X500.00 Y500.00 Z10.00 E50.00 ;Setup machine max feedrate
M204 P500.00 R1000.00 T500.00 ;Setup Print/Retract/Travel acceleration
M205 X8.00 Y8.00 Z0.40 E5.00 ;Setup Jerk
M220 S100 ;Reset Feedrate
M221 S100 ;Reset Flowrate
G28 ;Home
G92 E0 ;Reset Extruder
G1 Z2.0 F3000 ;Move Z Axis up
G1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position
G1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line
G1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little
G1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line
G92 E0 ;Reset Extruder
G1 Z2.0 F3000 ;Move Z Axis up

End G-Code:

G91 ;Relative positionning
G1 E-2 F2700 ;Retract a bit
G1 E-2 Z0.2 F2400 ;Retract and raise Z
G1 X5 Y5 F3000 ;Wipe out
G1 Z10 ;Raise Z more
G90 ;Absolute positionning
G1 X0 Y0 ;Present print
M106 S0 ;Turn-off fan
M104 S0 ;Turn-off hotend
M140 S0 ;Turn-off bed
M84 X Y E ;Disable all steppers but Z