How to Connect a CODESYS PLC to Factory IO Using OPC DA

Подробнее о видео

▶ Want to learn industrial automation? Go here:
▶ Want to train your team in industrial automation? Go here:

▶ You can read the full article here:


⌚Timestamps:
00:00 - Intro
00:51 - CODESYS
01:54 - Factory IO
02:18 - OPC DA
02:38 - Create a project
02:54 - Configure variables
03:46 - Write the logic
04:25 - Download the project
05:56 - Configure the OPC server
06:34 - Set Up Factory IO
07:43 - Wrap-Up

In this video, you’ll learn how to connect a CODESYS PLC to Factory IO using the OPC DA protocol. You’ll see how to create a new project in CODESYS, configure global variables for data exchange, and set up the Symbol Configuration to allow external access.

The video then guides you through writing basic PLC logic and downloading your project to a soft PLC. Next, you’ll set up the CODESYS OPC DA Server, configure user management, and prepare the OPC Configurator so Factory IO can communicate with your PLC project.

Then, you’ll learn how to configure the OPC driver in Factory IO, map sensors and actuators to tags, and run the simulation to test your program.

Factory IO isn’t free software, but you can try it for 30 days for free using this link:

@Codesys-AutomationSoftware

=============================

Check out the blogs and courses mentioned in the video:

How to Download and Install CODESYS:

CODESYS Basics | What Is CODESYS and Why Is It Important?

CODESYS 1: Introduction to PLC Programming:


CODESYS Debugging Techniques for Controls Engineers:

=============================

Did you miss out on the latest and greatest? Catch up now by watching our videos right here:







=============================

Follow us on Facebook 👉

Follow us on Twitter 👉

Follow us on LinkedIn 👉

Follow us on Instagram 👉

#RealPars #codesys #factoryio