OpenIPC native INAV OSD - Maiden Flight

Подробнее о видео

This is the maiden flight of OpenIPC running the native INAV OSD.
We installed the MSPOSD that enables the native INAV OSD over the MSP DisplayPort protocol.
We used the OpenIPC Configurator () for the installation which makes the whole process easier. Feel free to ask any questions.

Video Tutorial for installation:
In addition we select from the OSD Screen Format the option Avatar.
We uploaded these fonts specifically for INAV. ()

If you want please join my channel to get access to exclusive posts and updates on the upcoming OpenIPC goggles:


OpenIPC latency test:

There are also some reports that with the latest Android phones the latency is 20ms!
The only additional hardware that is required for the Android phone is an rtl8812au/eu2 wifi adapter.
Then, all you need is a box goggles to mount the smartphone and you are ready for FPV.

OpenIPC FPV is the cheapest digital FPV system in the world!
Thanks to the WFB-ng link it has some serious long range capabilities.

Read more here:
You will find everything you need to start your own project!🎉

The system supports MAVLINK bidirectional telemetry which makes it a complete solution for a quadcopter or fixed wing/VTOL. It also has WFB-ng link preinstalled and this means it has serious long range capabilities.(up to 100+km!)

More OpenIPC cameras will be in following videos so make sure you subscribe to not miss them!❤️

Please feel free to join our fast growing community:


You can also join our official OpenIPC facebook group:


Massive thanks to Kenny Plus for his creation!👏

Quadcopter:
Frame: Foxeer 7” Aura Long Range
Motors: Racerstar BR2508S 1275KV
ESC: Racerstar 4in1 Anniversary Edition
Flight Controller: Matek F722-SE
GPS: Matek M8Q-5883
Propellers: HQProp 7x3.5x3 V1S ()
FC Firmware: INAV 7.1.2
RX: FrSky R9mm with ExpressLRS telemetry firmware
Battery: Sony VTC6 Li-Ion 4s2p 6000mah

Camera used:
OpenIPC Optimus AIO with the OpenIPC Mario camera and ASUS AC56 WiFi external transmitter.
The whole setup is identical to the OpenIPC Mario AIO.

Ground Station used:
Radxa Zero 3w 1GB no eMMC (£20) running Ruby FPV firmware

Music:

Spotify:
Instagram :
SoundCloud :