Nikon Coolpix P900 firmware update

Подробнее о видео

Steps for firmware update
1. Create a folder on the computer hard disk and name it as desired.
2. Download F-P900-V15W.exe to the folder created in Step 1.
3. Run F-P900-V15W.exe to extract the firmware to a sub-folder in the new folder. The resulting file and folder hierarchy is shown below:
P900Update
- firmware (the sub-folder containing the firmware)
- firmware.bin (the camera firmware, located in the “firmware” folder)
- gpsfirm.bin (the firmware for the GPS module, located in the “firmware” folder)
4. Using a card slot or card reader, copy the “firmware” folder to a memory card that has been formatted in the camera.
Note: Be sure to copy the “firmware” folder to the root (top-most) directory of the memory card. The camera will not recognize the new firmware if it is placed in a folder under the root directory.
5. After confirming that the memory card write-protect (“lock”) switch is in the “write” (unlocked) position, insert the memory card into the camera and turn the camera on.
6. Select Firmware version in the Set up menu and follow the on-screen instructions to complete the firmware update.
7. When a message is displayed stating that the update is complete, turn the camera off and then on again. The firmware update for the GPS module will then begin automatically (if the camera starts normally, the GPS module update is already complete).
8. When a message is displayed stating that the second update is complete, turn the camera off and remove the memory card. Note that the second update will take longer than the first.
9. Confirm that the firmware had been updated to the new version. If the current firmware is not version 1.5, repeat the update from Step 1.

Link to download firmware :