The Easiest FPV Drone Build Tutorial You'll Ever Watch

Подробнее о видео

🚁 Buy the full kit (Includes manual FREE):
📕 Grab your build manual:

🛠️ The essential toolkit:
⭐️ Upgrade your drone with TPU:

🎮 Don’t forget your Radio Receiver!
ExpressLRS (Used in this video):
Crossfire:

---------------------------------------------

👇 Seperate parts for the build👇

The Drone
Frame:
4 Motors:
ESC + FC (Stack):
VTx:
Camera:
Antenna:
Propellors:

Radio Receiver
ExpressLRS (Used in this video):
Crossfire:

3D Print Files
Antenna Mount:
MISC TPU Mounts:

Toolbox Stuff
Portable Tool Kit:
Capacitor Wire:
3M Tape:
Zip-Ties:

Don’t forget the build manual ✌️


---------------------------------------------

🖥️ CLI Text (Copy and paste for your build)

VTx Table 👇
vtxtable bands 5
vtxtable channels 8
vtxtable band 1 BOSCAM_A A CUSTOM 5865 5845 5825 5805 5785 5765 5745 5725
vtxtable band 2 BOSCAM_B B CUSTOM 5733 5752 5771 5790 5809 5828 5847 5866
vtxtable band 3 BOSCAM_E E CUSTOM 5705 5685 5665 0 5885 5905 0 0
vtxtable band 4 FATSHARK F CUSTOM 5740 5760 5780 5800 5820 5840 5860 5880
vtxtable band 5 RACEBAND R CUSTOM 5658 5695 5732 5769 5806 5843 5880 5917
vtxtable powerlevels 5
vtxtable powervalues 25 200 400 600 600
vtxtable powerlabels 25 200 400 800 800
save

Drone tune 👇
set gyro_lpf1_static_hz = 0
set gyro_lpf2_static_hz = 700
set dyn_notch_count = 1
set dyn_notch_q = 500
set gyro_lpf1_dyn_min_hz = 0
set simplified_gyro_filter_multiplier = 140
set dterm_lpf1_dyn_min_hz = 97
set dterm_lpf1_dyn_max_hz = 195
set dterm_lpf1_static_hz = 97
set dterm_lpf2_static_hz = 195
set i_pitch = 75
set d_pitch = 47
set f_pitch = 118
set i_roll = 72
set d_roll = 42
set f_roll = 114
set i_yaw = 72
set f_yaw = 114
set d_min_roll = 42
set d_min_pitch = 47
set feedforward_averaging = 2_POINT
set feedforward_smooth_factor = 45
set feedforward_jitter_factor = 10
set simplified_i_gain = 90
set simplified_d_gain = 140
set simplified_dmax_gain = 0
set simplified_feedforward_gain = 95
set simplified_dterm_filter_multiplier = 130
set tpa_breakpoint = 1750
save

---------------------------------------------

👇 How I can help you👇

🚁 Become A Better FPV Drone Pilot In 5 Minutes -
📞 Book a one to one call -


---------------------------------------------

🎥 Video chapters
00:00 Introduction
02:03 What is Included
04:28 What you'll need to complete the build
06:15 Assemble the Bottom of the Frame
20:40 Dry Fit Out
24:22 Prepare and install the ESC
37:48 Install and Solder the motors
01:24:08 Install and prepare the FC
01:31:04 Connecting the VTx
01:41:08 Connect the Rx to the FC
01:57:03 Install the Camera
02:04:31 Finishing the build
02:10:28 Installing and connecting to BetaFlight Configurator
02:14:18 Update FC firmware
02:15:58 Tab 1 - Setup
02:16:23 Tab 2 - Ports
02:18:06 Tab 3 - Configuration
02:20:09 Tab 4 - Power & Battery
02:21:01 Tab 5 - Presets
02:21:43 Tab 7 - Receiver
02:24:47 Tab 9 - Motors and ESC Setup
02:35:22 Tab 8 - Modes
02:40:25 Tab 11 - Setting up VTx
02:42:45 Tab 10 - Setting up OSD
02:48:47 Tab 6 - PID Tuning & Rates
02:51:36 Advanced - Failsafe Settings
02:52:50 Finishing touches
02:58:09 First flight