Checking the SSB reception with SI4735-D60, TFT touch display and Arduino DUE

Подробнее о видео

It is a DSP receiver based on SI4735-D60 made by Silicon Labs. You can also use the SI4732-A10 to listen to SSB stations. This project is available on

Be a member of Facebook group “Si47XX for Radio Experimenters" - ...
See also:


1. [PU2CLR SI4844 Arduino Library](). This is an Arduino library for the SI4844, BROADCAST ANALOG TUNING DIGITAL DISPLAY AM/FM/SW RADIO RECEIVER, IC from Silicon Labs. It is available on Arduino IDE. This library is intended to provide an easier interface for controlling the SI4844.
2. [PU2CLR AKC695X Arduino Library](). The AKC695X is a family of IC DSP receiver from AKC technology. The AKC6955 and AKC6959sx support AM and FM modes. On AM mode the AKC6955 and AKC6959sx work on LW, MW and SW. On FM mode they work from 64MHz to 222MHz.
3. [PU2CLR KT0915 Arduino Library](). The KT0915 is a full band AM (LW, MW and SW) and FM DSP receiver that can provide you a easy way to build a high quality radio with low cost.
4. [PU2CLR RDA5807 Arduino Library](). The RDA5807 is a FM DSP integrated circuit receiver (50 to 115MHz) with low noise amplifier support. This device requires very few external components if compared with other similar devices. It also supports RDS/RBDS functionalities, direct auto gain control (AGC) and real time adaptive noise cancellation function.
5. [PU2CLR SI470X Arduino Library](). It is a Silicon Labs device family that integrates the complete functionalities for FM receivers, including RDS (Si4703).


#si4732 #si4735 #arduino #shortwave #ssb #receiver #radio