
------------------------
►*Wera 367 Torx screwdriver, TX 15 x 80 mm
►*Hazet 810SPC/6 Screwdriver-Set
------------------------
You like the video? Then let fabulouscar "thumbs up" and subscribe to our channel!
-----------------------------
All work on your vehicle is at your own risk! If you do not dare to change, we strongly advise you to visit a specialist workshop! Information or instructions in our instructions are without guarantee.
-----------------------------
The links marked with * are so-called affiliate links, which are linked with the affiliate program of Amazon and Ebay. If a purchase is made via such a link, I will be involved with a commission. There are no additional costs for you. Where, when and how you buy a product is of course up to you.
#W140 #recirculation #cabinfilter
0:00 Intro
0:21 In the passenger footwell we find the air circulation filter
0:40 First we remove the carpet
0:55 Then the side carpet
1:11 Then we remove the screw nut with a nut 10 mm
2:00 Unhook two plastic hooks
2:14 Pull out gently
2:40 Attention, two more clips on the back
2:51 At the back are two hooks on the left and right
3:18 Unclip the grille with a screwdriver
3:41 Carefully remove the grille
3:58 Here you can see the two hooks again
4:17 Remove the dirty fleece
4:53 The new fleece, however, is much thinner
5:12 Perfect fit with holes
5:54 Clip the grid back in
6:04 Caution, carefully clip in five clips
7:03 Better than the old filter
7:15 At the back you can see the two hooks
7:34 Attach the panel, hook it in at the front and clip it in at the back
8:37 Lay the side carpet again
8:56 Tighten the screw nut with a 10 mm nut again
10:21 Lay the carpet back
10:50 Thank you for watching