Скачайте изображение (превью) выбрав качество

320x180 480x360 640x480 1280x720

A very common issue found in homes is the garbage disposal not working properly and not spinning when the switch is turned on or just humming and continuously tripping the reset. I will walk you through the below troubleshooting steps starting with the fastest / easiest and then progressing up to replacing your garbage disposal if needed.

Garbage Disposal Troubleshooting Steps
1) Confirm power at the outlet
2) Confirm power reset is not tripped at the bottom of the garbage disposal
3) Try to manually turn the disposal motor
4) Remove and inspect the internals of the garbage disposal and check for anything jammed between the spinning plate and outside housing
5) Replace if garbage disposal looks damaged or can't find the root cause for the motor not spinning.

Tools Used
New 1/3 HP Badger Garbage Disposal:
Klein Voltage Tester:
Wire Strippers:
"Jamb Buster" Allen Wrench:
Garbage Disposal Power Cord:

Tools Every Weekend Warrior Needs
Makita Corless Drill Combo Kit:
Dewalt Drill Bit Set:
Dewalt Screwdriver Bit Set:
Craftsman Screwdriver Set:
Eklind Allen Wrench Set:
Pliers (4-Piece Set):
Stanley Utility Knife:
Stanley Tape Measure:
Studbuddy Stud Finder:
Johnson Torpedo Level:
Stanley Hammer:
Buck Bros Wood Chisel Set:
Little Giant Ladder:

DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission.

Чтобы скачать видео "How To Repair A Garbage Disposal | Not Spinning / Humming / Not Used For Years" передвинте ползунок вправо