Скачайте изображение (превью) выбрав качество

320x180 480x360 640x480 1280x720

Here in this video we going to see the procedure on how you can replace the CMOS battery in the case if you are getting an error like Press F1 to Continue or Press F1 to Run Setup when you boot the Windows computer even though you the devices are connected.

If you have any kind of problem with the computer’s hardware like failed to detect the hard disk or keyboard etc, this method won’t work. This method only works when the computer detects all devices like keyboard, mouse, etc and still, you see the error like Press F1 to continue or Press F1 to Run Setup.

Even though you turn off the error by tweaking the BIOS settings, you will still see the same message soon after you boot the computer and it is not the solution to this problem. You actually need to fix this.

So, to permanently fix Press F1 to continue or Press F1 to Run Setup error, you must replace the CMOS battery. Here is the battery number CR 2032 that you need to purchase from any electrical store or home depot or target.

Once you have the new battery with you, unplug all the computer connections then open the cabinet by unscrewing the bolts.

There you see the motherboard and here is the CMOS battery that helps to serve the right date and time and also stores the system hardware settings.

So, when you tweak some settings at the BIOS, they remain unchanged when the CMOS battery drains. To fix, you just need to replace it.

Now take the tester or screwdriver then gently press to the side to pop out the current CMOS battery.

When it comes out, just replace with the new battery then close the cabinet lid.

Now reconnect all the cables then try to boot the computer.

If you still see the error, get into BIOS settings by pressing the keys F2 or Delete and it depends on the manufacturer. Here let me switch to advanced mode.

Now move to BOOT options then disable ‘Wait for F1 If Error’ then save the settings. Now you don’t see the error message. Right?

When you see the Windows login screen, restart the computer then again go to the boot options by entering into BIOS settings then enable ‘Wait for F1 If Error’ and then save the settings.

That’s it. You replaced the CMOS battery to fix Press F1 to Continue or Press F1 to Run Setup error.

If you still see the error, you need to troubleshoot the error hardware like hard disk, keyboard, mouse etc.

#FixComputer #BIOS #CMOS

Subscribe to TechEmpty at

**Stay Connected with Sai Praveen**
Facebook:
Twitter:
Google Plus:
Website:

Чтобы скачать видео "How To Replace CMOS Battery to Fix 'Press F1 to Run Setup' Error?" передвинте ползунок вправо