Скачайте изображение (превью) выбрав качество

320x180 480x360 640x480 1280x720

Here's how to make a super-bright LED light panel. It's equivalent to a 1000w incandescent light bulb, and it's super useful for video work as it has a daylight colour temperature and doesn't use PWM for dimming. There are 900 individual LEDs in this panel, which is why it's so bright.

Parts links:

Disclosure: These are affiliate links. If you click them and make a purchase from the various merchants they link to, DIY Perks may earn a commission. Affiliate programs and affiliations include, but are not limited to the eBay Partner Network and Amazon Associates.


LED Strips required:


All the other components as a KIT:

Here's a list of parts:
(you can purchase from either eBay or Amazon)

STEP-DOWN VOLTAGE REGULATOR

AliExpress:
eBay:


CAMERA SHOE ADAPTER:

XT60 CONNECTORS:




The following are better sourced from your own local hardware store:

a sheet of 6mm MDF

a sheet of 18mm MDF

2x aluminium tubes or wooden dowels

a switch

magnet wire

6.8k resistor

small & medium wood screws

a sheet of plexiglass.

12 awg wire

a small fan



How to make a shard light:


How to make a graphics card quieter:


How to make a battery protection circuit:
www.youtube.com/watch?v=1Fs4SfVSsLk

If you attempt this project you do so at your own risk. I assume no responsibility for any injuries or damages caused to people or property during its construction or use.

If you are under 18, a responsible adult must be present when using power tools.

I have taken care in making sure the information in this video is accurate. However,I am unable to provide any warranty concerning the accuracy or completeness of any information contained in the video.

OFFICIAL LINKS:
Support me on Patreon:
Official Website:
Discord:
Forums:
Twitter:

Чтобы скачать видео "How to make a super bright LED light panel (for video work etc)" передвинте ползунок вправо